LIGHT FIXTURE OPTIONS
The following is a list of the options for the four versions of our basic light fixtures, the HPL, BPL, OAL, and LPL fixtures
hpl
-R-
"RECORDING" LETTERING OPTION ("ON AIR" leave blank)
"-x-" Indicates custom lettering. Put desired lettering after the part number. To add a logo supply a vector art file, preferrably in Adobe Illustrator, flattened, black and white.
-RED- -BLU- -GRN- -WHT-
Color of the "base" LEDs lighting the lettering
-S-
There is a two color option for the HPL. The "base" color is what is selected with the color option. When "keyed" the fixture will change from this "base" color to RED, indicated by the "S" or "SECOND" color option
-F-
When added to the part number indicates a flashing light fixture (600 ms on, 400 ms off). The light will either change color (-S- option) or simply flash in RED. The flashing RED LEDs only happen in RED, not the "base" color
-N- -B- -W-
Powder coat the metal top "box". Indicate either black, or white powder coating. Natural aluminum will be supplied without the option selectd. Select one color.
-HMB- -HMW-
This is added to the part number if an additional acrylic piece is desired to be mounted between the light fixture and the wall. Usually selected to cover a single gang electrical work box. Can be used either horizontally or verically. "HMB" is black, "HMW" is white.
-CMF -CMG
Normally the HPL lights mounts parallel to the wall using a steel plate mounted to the wall and a magnet on the light fixture. If desired, there are two options for mounting an HPL to the ceiling.
The "CMF" option mounts the steel plate to the ceiling and the sign magnet is located on the top of the fixture.
The "CMG" option has two TEE GRID clips mounted to the top of the fixture. This allows the HPL to be mounted to the grid.
bpl
-R-
"RECORDING" LETTERING OPTION ("ON AIR" leave blank)
"-x-" Indicates custom lettering. Put desired lettering after the part number. To add a logo supply a vector art file, preferrably in Adobe Illustrator, flattened, black and white.
-S-
There is a two color option for the BPL. The "base" color is what is selected with the color option. When "keyed" the fixture will change from this "base" color to RED, indicated by the "S" or "SECOND" color option
-RED- -BLU- -GRN- -WHT-
Color of the "base" LEDs lighting the lettering
-N- -B- -W-
Powder coat the metal side "box". Indicate either black, or white powder coating. Natural aluminum will be supplied without the option selectd. Select one.
-BMB- -BMW-
This is added to the part number if an additional acrylic piece is desired to be mounted between the light fixture and the wall. Usually selected to cover a single gang electrical work box. "BMB" is black, "BMW" is white.
OAL
HG- HS- VG- VS-
Color of the frame and orientation of the light fixture (horizontal or veritcal, gold or silver trim
-R-
Add the "-R-" option for RECORDING text
-GRN -WHT
Color of the LEDs lighting the lettering (leave blank for RED LEDs)
-F-
When added to the part number indicates a flashing light fixture (600 ms on, 400 ms off)
LPL
HG- HS- VG- VS-
The color of the trim pieces
-r-
"RECORDING" LETTERING OPTION ("ON AIR" leave blank)
"-x-" Indicates custom lettering. Put desired lettering after the part number. To add a logo supply a vector art file, preferrably in Adobe Illustrator, flattened, black and white.
-GRN -WHT
Color of the LEDs lighting the lettering (leave blank for RED LEDs)
power supplies
HPL-PS
Power supply that takes 90 to 264 VAC and provide 12 VDC enough to power any of our light fixtures. This is a hard-wired power supply.
Power supplies with Inputs capable of up to 370 VAC with special orders.
Power supplies are usually in stock